Training Migas - Oil and Gas
By February 14, 2019 0 Comments

COMBUSTION ANALYSIS

COMBUSTION ANALYSIS AND OPTIMIZATION

Yogyakarta | 19 – 21 Februari 2019 | Rp 6.000.000 
Yogyakarta | 26 – 28 Maret 2019 | Rp 6.000.000
Yogyakarta | 16 – 18 April 2019 | Rp 6.000.000
Yogyakarta | 02 – 04 Mei 2019 | Rp 6.000.000

Jadwal Training 2019 Selanjutnya …

 

 

COMBUSTION ANALYSIS TRAINING OVERVIEW

How do we minimize our cost of operating heating equipment, conserve energy and reduce carbon emissions while maintaining heating performance? The answer is, maximize the efficiency of existing furnaces and boilers, as well as verify the performance of newly installed high efficient equipment. The only way to guarantee that a system is operating at maximum efficiency is to perform a combustion analysis and properly adjusting the air/fuel ratio. This program is designed to provide a full understanding of the combustion process, combustion test procedures and the adjustments required to maximize fuel efficiency.

Training will also familiarize participants with fundamentals of common residential gas and oil central space heating systems. Training includes a discussion of the combustion process, chimneys, appliance types, operating and safety controls, electricity and fuel delivery. Participants will be trained to perform tests particular to all types of gas-fired and oil-fired systems and to recommend retrofits. Besides topics of combustion analysis, safety controls, vent safety, carbon monoxide measurement, and heat rise measurements, the treatment of on and off-cycle losses will be covered for oil and gas fired units.

 

COMBUSTION ANALYSIS TRAINING OBJECTIVES

This class will help prepare you to tackle the job of combustion analysis on mid and high-efficiency natural gas burners. This program is designed to provide a full understanding of the combustion process, combustion test procedures and the adjustments required to maximize fuel efficiency.

 

COMBUSTION ANALYSIS TRAINING CONTENT

  • Fundamentals & Basic Applications
  • Introduction to Combustion / CFD
  • Fundamentals of common residential gas and oil central space heating systems
  • Understanding of the combustion process, combustion test procedures and the adjustments required to maximize fuel efficiency.
  • A review of the properties of gas, pressure measurements, meter-clocking & the combustion process
  • Application and use of combustion analysis instruments.
  • Steps required to correct typical combustion problems
  • Mathematical behind Combustion / CFD
  • Combustion Analysis (Concepts & Demonstration)
  • Geometrical Modeling
  • Mesh Generation
  • Boundary Conditions
  • General Hydrodynamics/Aerodynamics Analysis
  • Cold Flow Analysis
  • Formulation for Reaction Modeling
  • Special Case : Burner Analysis
  • Discussion of the combustion process, chimneys, appliance types, operating and safety controls, electricity and fuel delivery
  • Tests particular to all types of gas-fired and oil-fired systems and to recommend retrofits.
  • Safety controls, vent safety, carbon monoxide measurement, and heat rise measurements, the treatment of on and off-cycle losses will be covered

 

WHO SHOULD ATTEND?

This training is recommended to be followed by the Technicians, Engineers, Maintenance and Operator Supervisor in furnace/boiler, steam/gas power plant.

 

COMBUSTION ANALYSIS TRAINING METHODS

  • Lecturing
  • Discussion/Sharing
  • Case Study
  • Simulation
  • Evaluation

 

COMBUSTION ANALYSIS TRAINING INSTRUCTOR

  • Sigit Budi Hartono, ST., MT.
  • Sri Prasetyo Budi, S.T., M.T.

Instructor is a professional consultant in Material Science, Metallurgy, Mechanical Testing and Failure Analysis.

 

TIME & VENUE

  • Batch 3: 26 – 28 Maret 2019
  • Batch4: 16 – 18 April 2019
  • Batch 5: 02 – 04 Mei 2019
  • Batch 6: 18 – 20 Juni 2019
  • Batch 7: 02 – 04 Juli 2019
  • Batch 8: 06 – 08 Agustus 2019
  • Batch 9: 24-26 September 2019
  • Batch 10: 08 – 10 Oktober 2019
  • Batch 11: 26 – 28 November 2019
  • Batch 12: 03 – 05 Desember 2019
  • 08.00 – 16.00 WIB

Yogyakarta: Cavinton Hotel Yogyakarta ; Neo Malioboro Hotel Yogyakarta Ibis Styles Hotel Yogyakarta
Surabaya: Hotel Santika Pandegiling Surabaya
Malang: Best Western OJ Hotel Malang ; Harris Hotel & Convention Malang
Jakarta: Dreamtel Jakarta Hotel ; Ibis Jakarta Tamarin Hotel
Bandung: Golden Flower Hotel Bandung ; Serela Merdeka Hotel Bandung
Bali: Ibis Bali Kuta Hotel ; Harris Kuta Raya Hotel Bali

In House Training : Depend on request

 

TUITION FEE

  • 6.000.000 IDR / participant (for public training in Yogyakarta)  -> minimum quota of 2 participants
  • 7.000.000 IDR / participant (for public training in Bandung, Jakarta, Surabaya)  ->  minimum quota of 3 participants
  • 8.000.000 IDR / participant (for public training in Bali)  -> minimum quota of 3 participants

 

TRAINING COMBUSTION ANALYSIS FACILITIES:

INCLUDE:

  • Meeting Room at hotel, Coffe Break, Lunch
  • Module (hard & soft copy/flashdish)
  • Training Kit, Souvenir, Certificate
  • Airport pick up services
  • Transportation during training

EXCLUDE:

  • Penginapan peserta training
  • Tax (Ppn 10 %)

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
 

cforms contact form by delicious:days

Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.
  • TwitThis
  • Facebook
  • LinkedIn
  • MySpace
  • YahooBuzz
  • Y!GG
  • Webnews
  • Digg
  • del.icio.us
  • StumbleUpon
  • Reddit
  • Technorati
  • YahooMyWeb

Post a Comment