Training Migas - Oil and Gas
By December 23, 2013 0 Comments

BASIC DRILLING AND COMPLETION OPERATION WITH HSE CONSIDERATION

BASIC DRILLING AND COMPLETION OPERATION WITH HEALTH, SAFETY, ENVIRONMENTAL CONSIDERATION

Hotel Hilton, Bandung | 21 – 25 Oktober 2013 | IDR 18.750.000

 

 

SASARAN BELAJAR :

Setelah menyelesaikan kursus ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar dan berbagai perhitungan sederhana untuk pelaksanaan pemboran sumur-sumur minyak, gas dan reservoir panas bumi, pengembangan pelaksanaan perhitungan ini untuk meningkatkan kinerja pemboran sumur-sumur di lapangan.
  • Melakukan diagnosis sederhana dan memengerti penyelesaian (well completion) dan membuat suatu sumur minyak, gas atau panas bumi.
  • Membuat analisis sederhana terhadap data eksplorasi sumuran minyak, gas dan panas bumi , kemudian mampu melakukan perancangan global pemboran kinerja dan merencanakan pengembangannya.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana untuk perencanaan lumpur pemboran, semen, hidrolika, well control.
  • Mempergunakan pengetahuan dalam perancangan pemboran tegak, untuk keperluan perancangan pemboran sumur miring, sumur horizontal baik dengan teknologi overbalance maupun underbalance.
  • Pengetahuan tentang Peraturan Perundangan dalam K3L
  • K3L dalam Operasi Pemboran dan Workover

PRE-REQUISITE :

Latar belakang : Operator/Senior Operator/Engineer/Non Engineer

MATERI KURSUS

Introduction : Rotary Drilling Operations

  • Steps to drilling a well
  • Types of rigs
  • Rig Components
  • Rig Systems

Rheology of Drilling and Completion Fluids

Equations and Inflow Performance RelationshipFunctions of Drilling/Completion

  • Fluids
  • Fluid Types,
  • Fluid Models
  • Introduction to Rotary Viscometer
  • Other Testing Equipment
  • Objectives of Monitoring Fluids

Mud System

  • General Equations and ConceptsDiagnostic tests
  • Water based muds
  • Oil based muds
  • Additives
  • Mud handling system

Cementing

  • Tubing DesignFunctions of cement
  • Cement Types
  • Cement Additives

Oil Field Tubulars and Hydraulics

  • Drill string
  • Casing and tubing
  • Casing classification
  • Stresses on casing
  • Casing setting depth
  • Burst and collapse calculations
  • Wellheads

Drilling System – Pressure Loss Calculations

  • Hydrostatics
  • Buoyancy
  • Flow through pipes and annuli
  • Flow path
  • Pressure loss calculations

Drilling System – Bit & Nozzles

  • Hydrostatics Bit Types
  • Bit Parts
  • Bit Classification
  • Bit Nozzles

Introduction to Well Control

  • Hydrostatics Definitions
  • Causes of kicks
  • Kick indicators
  • Shut-in procedure
  • Well Kill Procedures

Directional Drilling

  • Reasons for directional wells
  • Planning Trajectory
  • Kickoff Methods
  • Survey Methods
  • Survey Calculations

Penyelesaian sumur (Well Completion)

Tipe-tipe penyelesaian sumur

a. Tipe penyelesaian sumur berdasarkan pemasangan pipa selubung
b. Tipe penyelesaian sumur berdasarkan jumlah zona produksi

Peralatan bawah tanah

  • Pendahuluan
  • Peralatan produksi bawah sumur

Penyelesaian sumur untuk sumur-sumur pengangkatan buatan

  • Sucker Rod Pump (Pompa angguk)
  • Electric Submersible Pump
  • Gas lift
  • Hydraulic Pump
  • Pompa Jet

Kerja ulang sumur (Work Over)

    1. Problem Reservoir
    2. Problem mekanikal
  • Perawatan sumur
    1. Kerusakan Peralatan
    2. Masalah Parafin
    3. Pengendapan Scale dan Pengontrolannya
    4. Masalah Pasir
    5. Kerusakan Formasi
  • Tipe-tipe Pengerjaan Kerja Ulang Sumur
    1. Mengubah Zona Produksi
    2. Perangsangan Sumur (Well Stimulation)
    3. Squeeze Cementing
  • Peralatan Kerja Ulang
    1. Menara (Rig) Konvensional
    2. Unit Wireline
    3. Gulungan Tubing Tanpa Sambungan (Endless Tubing Coil)
    4. Unit Snubbing

Sand Control Technology

  • Sand Control Concept
    1. Reason for Sand Control
    2. Determining Need for Sand Control
    3. Selecting Type of Control
    4. Proper Drilling and Completion
  • Gravel and Screen Selection
    1. Slot and Gravel Size Design
    2. Slotted Liners
    3. Screens
    4. Prerpacks
  • Inside Gravel Packing
    1. Perforation Packing
    2. Two Stages Methods
    3. Use of Viscous Carrying Fluid
    4. Downhole Equipment
    5. Type of Operation
    6. Sigle Stage Methods
  • Open Hole Gravel Packing
    1. Conventional Methods
    2. Special Tools and Operations
    3. Zone Isolation Methods
    4. Model Study Result
    5. Deviated Well Problem and Solutions
  • Consolidation
    1. Formation Consolidation
    2. Consolidation System Features
    3. Well Preparation and Design Factor
    4. Consolidated Packs
    5. Water Base Systems
    6. Thermosetting Gravel Packs
  • Stable Arc Sand Control
    1. The Stable Concept
    2. Applying Stress for Sand Control
    3. Conventional Cementing Limitations
    4. Downhole Equipment
    5. Type of Operation
  • Health, Safety and Environmental Consideration in Drilling Operation
    1. Peraturan Perundangan tentang K3L
    2. Pengauh Gas Beracun pada Operasi Pemboran
    3. Pengaruh Gas Beracun Bagi Kesehatan
    4. H2S
    5. Gas Detection Equipments
    6. Noise level & exposure in Oil Gas Industry
    7. Noise Mapping

INSTRUKTUR :

  1. 1. Dr.Ir. Sudjati Rachmat, DEA
  2. 2. Ir. Radintya Danas, MT

Dr. Ir. Sudjati Rachmat, DEA was graduated from Petroleum Engineering Department of ITB in 1979 and hold Doctorate Degree with honored in 1987 from Ecole Centrale de Lyon I, France. The topic of his thesis is Modelisation Numerique d’Ecoulements Polyphasiques en Milieux Poreux Application au Cas de Calcul des Champs de Pressions et de Saturations dans un Gisement de Petrole.

For the time being, he became a lecturer in Petroleum Engineering Department of ITB. His subjects are Analysis and Numerical Method, Engineering Mathematics, Computer Simulation, Fluid Mechanic, Artificial Intelligence for Petroleum Engineering.

He also gave many courses to the community, such as: basic reservoir engineering and reservoir simulation, basic production engineering, down hole well testing, statistic and numerical method for petroleum engineering, basic log interpretation, etc. He is a member of some profession organization such as: IATMI, SPE/EIME, IMA, HAIAI, FPS-USA,

VANUE AND DATE

Vanue : Hotel Hilton Bandung

Date

  • 20-24 Mei 2013 ( Batch I )
  • 21-25 Oktober 2013 ( Batch II)

INVESTATION

IDR 18.750.000,- /Participant Non residential. Fir send 3 participant from the same company IDR. 17.250.000,-/participant.

FACILITIES

  • Training Kit
  • Soft Copy Material Training On Flashdisk 4GB.
  • Coffee Break & Lunch
  • Certifikat
  • Souvenir
  • Additional Program (optional)

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
 

cforms contact form by delicious:days

Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.
  • TwitThis
  • Facebook
  • LinkedIn
  • MySpace
  • YahooBuzz
  • Y!GG
  • Webnews
  • Digg
  • del.icio.us
  • StumbleUpon
  • Reddit
  • Technorati
  • YahooMyWeb

Post a Comment

Website Edukasi Terbaik Indonesia