Training Migas - Oil and Gas
By August 7, 20180 Comments

ADVANCED OIL AND GAS PRODUCTION SYSTEM

ADVANCED OIL AND GAS PRODUCTION SYSTEM

Bandung | 24 – 26 September 2018 | Rp 8.950.000/person
Bandung | 17 – 19 Oktober 2018 | Rp 8.950.000/person
Bandung | 26 – 28 November 2018 | Rp 8.950.000/person
Bandung | 26 – 28 Desember 2018 | Rp 8.950.000/person

 

 

OBJECTIVES

After participate in this course, the participants will be able and capable to :

  1. Understand the basic concept of oil , gas production system and water handling processes and facilities, and how to operate this technology in field application.
  2. Diagnostic of oil and gas reservoir performance under actual drive mechanism and future performance with current handling processes.
  3. Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  4. Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil, gas and water handling processes.

 

AUDIENCE:

  • No specified (Operator/Sr. Operator/Engineer or Non Engineer)

 

TRAINING MATERIAL OUTLINE 

  1. Gas Production System
  2. Introduction to Gas Handling and Facilities
  3. Gas Properties
    • Ideal gas
    • Real Gas
    • Gas Formation Volume Factor
    • Gas Compressibility
    • Gas-Water System
    • Gas-Condensate System
  4. Gas Reservoir Performance
    • Reservoir Gas Flow
    • Gas Reserves
    • Well Completion Effect
    • Tight Gas Well
    • Gas Well Testing
  5. Gas Piping System
    • Basic Flow Equation
    • Flow in Wells and Flow in Pipelines
    • Effect of Liquids
    • Use of Pressure Traverse Curve
    • Liquid Removal from Gas Wells
  6. Gas Compression
    • Type of Compressors
    • Compressor Design
    • Centrifugal Compressor
  7. Total System Analysis
    • Tubing and Flow Line Effect
    • Separator Pressure Effect
    • Compressor Selection
  8. Flow Measuring
    • Orifice Metering
    • Metering System Design
    • Other Metering Methods
  9. Gas Condensate Reservoir
    • Well Testing and Sampling
    • Gas Cycling
  10. Field Operation Problems
    • Pressure Cumulative Production Plot
    • Hydrate Formation
    • Sour Gas Production
    • Corrosion Control With Inhibitors
    • Sulfur Deposition
  11. Gas Processing
    • Field treatment of Natural Gas
    • Gas Plant Operation
    • Gas Dehydration
    • Gas Sweetening
  12. Oil Production System
  13. Oil Well Surface Production Equipment and Operation
    • Oil Well Equipment
    • Oil Well Production Operation
    • Well Automatic Safety Device
  14. Oil Gathering System. Manifold and Flowline
    • Oil Gathering System
    • Manifold System
    • Flow line Sizing and Design
  15. Crude Oil and Gas Separation
    • Separator and Principle of Separation
    • Design of Separator
    • Oil Dehydration
  16. Principles of Measurement
    • Introduction to Measurement
    • Crude Oil Measurement
    • Gas Measurement
  17. Well Test
    • Introduction
    • Responsibility for Test
    • Preparation for Test
    • Types of Well Test
    • Equipment and Procedures
    • Accuracy of Fluid Measurement
    • Problem in Testing
    • Type of Test
  18. Water Handling Facilities
  19. The Chemistry of Water
    • Chemical and Physical Properties
    • Water Sampling Procedures
    • Quantitative Analysis of Oilfield Waters
    • Water Analysis Techniques
  20. Water Formed Scales
    • Why Scales Form
    • Predicting Scale Formation
    • Mixing Waters – Compatibility
    • Preventing Scale Formation
    • Scale Removal Methods
  21. Corrosion in Water Injection System and Disposal System
    • Theory of Corrosion
    • The Effect of Metal Composition
    • Effect of Water Composition
    • Forms of Corrosion
    • Corrosion Control Methods
    • Corrosion Inhibitors
    • Internal Coatings and Linings for Tubular Goods
    • Internal Tank Coatings and Cathodic Protection
    • Non-Metallic Tubular Goods Types
    • Removal of Corrosive Gases from Water
    • Oxygen Removal
    • Removal of Hydrogen Sulfide from Water
    • Removal of Carbon Dioxide from Water
    • Oxygen Exclusion
    • Design to Minimize Corrosion
    • Corrosion Monitoring Techniques

 

TRAINING INSTRUCTOR

Prof. Dr. Ir. Sudjati Rachmat, DEA. adalah dosen di jurusan perminyakan ITB sejak tahun 1979 sampai sekarang. Beliau alumnus dari ITB lulus tahun 1977, kemudian melanjutkan pendidikannya di Diplome d’Etude Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dan pada tahun 1985 – 1987 beliau mengambil program Docteur en Mecanique de Fluide (Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE.Dr. Sudjati Rachmat sering menjadi instruktur dalam banyak pelatihan yang berkaitan dengan perminyakan untuk perusahaan di seluruh Indonesia, diantaranya seperti Pertamina, Chevron, Badak LNG, Total, Vico, Mobil Oil Indonesia, Ministery of Mining and Energy, Unocal Indonesia, Lemigas, IATMI-IWPL Migas, PPTM Migas, PT Caltex Pacific Indonesia, Gulf, Arco, dll. Topik-topik training yang Beliau sampaikan diantaranya adalah production surface and down hole equipment, Basic Reservoir Engineering, Sucker Rod Pumping Theory and Practice, Production Logging Engineering, Nodal Analysis and Production Optimization, Well Test, Operation and Interpretation, Well Design, Completion and Workover, Numerical and Statistical Method for Petroleum Engineering Problems, Oil-Well Stimulation, Hydraulic Fracturing, Statistics for Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery, Applied Reservoir Engineering and Reservoir Simulation, Aspects of Horizontal Well Technology, Geology and Geophysics Modeling, Advanced Programming on Numerical Analysis and Industrial Information System, Management Information System, Well Stimulation of Oil and Gas Reservoir, Horizontal Well Technology, Transportation of Oil and Gas, Sand Control Technology, dan lain-lain.Beliau banyak melakukan penelitian di bidang MIGAS dan telah mempublikasikan dan menseminarkannya di forum dunia.

 

VENUE :

Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

TRAINING DURATION :

4 days

 

 

TRAINING TIME 

  • 24 Sep 2018-26 Sep 2018
  • 17 Oct 2018-19 Oct 2018
  • 26 Nov 2018-28 Nov 2018
  • 26 Dec 2018-28 Dec 2018

 

INVESTMENT PRICE/PERSON 

  1. Rp. 8.950.000/person (full fare) or
  2. Rp. 8.750.000/person (early bird, payment 1 week before training) or
  3. Rp. 8.500.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
 

cforms contact form by delicious:days

Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.
  • TwitThis
  • Facebook
  • LinkedIn
  • MySpace
  • YahooBuzz
  • Y!GG
  • Webnews
  • Digg
  • del.icio.us
  • StumbleUpon
  • Reddit
  • Technorati
  • YahooMyWeb

Post a Comment